Pre-pilotTesting on ShipSim now. First sea-trial installation planned for 2027.
MarineSense Book a demo
Offline AI for the engine room

A second engineer who has read every manual. Even with no link.

MarineSense runs on a server in your control room. It reads machinery data through a one-way gateway and answers from the ship's own manuals, with the page cited. It never sends a command to any machinery.

  • Runs with no internet
  • Read-only to OT
  • Every answer cites a page

Example screen. Readings and page numbers are illustrative.

0OT writes allowed. Any attempt is a hard stop in testing.
4Plant systems running in ShipSim today
7Founders across marine, AI and ETO work
USD 1,000Per ship per month, every rank included
The problem

Fewer engineers, more machinery, and the manual is in the other office

Crews are smaller and change more often. The knowledge to fix a fault sits in thousands of manual pages and in the head of the engineer who just signed off.

39,100

Shortfall of certified officers worldwide.

BIMCO/ICS Seafarer Workforce Report, 2026
+50%

Rise in average machinery claim cost per vessel, from about USD 20,000 to 30,000.

Cefor Nordic hull statistics
USD 40m

Largest criminal penalty for illegal oily-waste discharge, paid by Princess Cruises.

US Department of Justice, 2016
What engineers get

One assistant for the whole plant

Manuals, live data and environmental rules in one answer, instead of three separate systems.

Answers from your ship's own manuals

OEM manuals stay in the vessel's library and are indexed in place. Every answer shows the document, revision and page. When it falls back on general knowledge, it says so.

  • Typed questions in plain language
  • Conflicting sources are referred to the Chief Engineer
  • New manuals added only with CE approval
VESSEL KNOWLEDGEONBOARD
Purifier bowl opening procedure?
From: Westfalia separator manual · Rev 2

Stop the feed, run the displacement water, then wait for the bowl to come to a complete stop before loosening the lock ring. The manual lists the special tools on the facing page.

Separator manual · p. 5-14Tools list · p. 5-15
Who it is for

Used in the engine room. Bought by the technical office.

On the vessel

Less searching, more fixing

Chief Engineer
Stays in charge. Approves manuals, closes advisories and sees system status.
2/E, 3/E, 4/E and ETO
Fast answers on watch, OWS planning and job preparation.
Master
A vessel overview and confirmation of discharge windows on the route.
In the office

Evidence you can audit

Technical superintendents
Own the deviation criteria and review each vessel's configuration.
Technical directors
Lower crew workload and earlier warning, with records behind every advisory.
New-build owners
Delivered with MarineSense running, fitted during sea trials.
How it works

Data flows one way. Answers stay onboard.

MarineSense sits beside your existing systems, including platforms such as SMARTShip or Vessel Insight. It reads, it never writes, and it keeps working when the satellite link drops.

SHIP SYSTEMS Engine room OT AMS, OWS and OCM, flowmeters, GPS SECURITY BOUNDARY One-way gateway Writes are rejected and logged ONBOARD SERVER MarineSense edge Local model, manual index, rules, vessel history SHIP'S LAN ECR Desktop Rank profiles, CE to cadet Shore server, when the link allows: sync and second opinion

Offline first

Core assistance needs no internet. Updates are small packages queued for port Wi-Fi or a good satellite window.

Read-only, always

Any write or control path is a hard stop in testing. That keeps the cyber and class approval burden low.

Gaps shown as gaps

Missing data is shown as missing. Values are never repeated or invented to fill a gap.

ShipSim

Proven on a simulated plant before it goes aboard

ShipSim is our own machinery simulator. An instructor injects hidden faults and you watch MarineSense find and explain them. Your vessel takes no risk.

  1. The instructor injects a hidden fault

    Observers on the OT screens and on MarineSense never see the fault's label.

  2. The test runs to a fixed script

    Fixed start conditions, events and expected outcomes. Each run becomes a regression baseline.

  3. Seafarers grade the result

    Marine, IT and deployment reviewers grade every advisory.

    PassNeeds improvementNeeds reviewHard stop
ShipSim plant · November 2026
Oily water separator, flowmeter, OCM, GPSRunning
Diesel generators and switchboardRunning
Fuel oil purifiersRunning
IncineratorRunning
Read-only HTTP and Modbus gatewayRunning
Two-stroke main engineNext
AC, refrigeration, LO, boiler, scrubberPlanned
Where it fits

Keep your dashboards. Add the engineer's answer.

Monitoring platforms show the data. Document assistants search the manuals. OWS recorders log the discharge. MarineSense reads all three and explains what they mean together.

CapabilityMarineSenseDocument AI assistantsPerformance monitoringOEM remote monitoringOWS recorders
Answers with the manual page citedYesYesNoNoNo
Works with no internetYesSomeSomeNoYes
Reads live machinery dataYesNoYesOwn makeOWS only
Explains a deviation in plain languageYesNoLimits onlyVia shore expertNo
Plans OWS dischargesYesNoZone alertsNoRecords only
Flags bad sensor dataYesNoSomeSomeNo
Carries open issues across crew changeYesNoNoNoNo

Category comparison based on public product pages and onboard screens reviewed in November 2026. Individual products vary.

Pricing

One price per ship

A monthly subscription for the software. The onboard hardware is bought outright. Terms for the first fleets are agreed with each customer.

MarineSense subscription
USD 1,000per ship per month
  • All modules: knowledge, machinery, environmental, continuity, job preparation
  • Updates and model improvements, sized for satellite links
  • Shore sync and shore review when the link allows
  • Every rank on board, with no per-user fees
Talk to us about a pilot

Onboard hardware

Edge server, one-way gateway and UPS, sold to the ship and installed by our deployment engineers.

Pilot on sister ships

Start with a few vessels of one class, with acceptance tests agreed before installation.

New builds

Fitted and commissioned during sea trials, so the ship is delivered with MarineSense running.

ShipSim

Licensed separately to yards, integrators and other test teams.

The team

Built by people who have stood the watch

Seven founders from three disciplines. Every result passes marine, IT and deployment review before it reaches a vessel.

Marine engineering
ABAthul Basil AntonyGMGeo Mrithul AntonyNRNikhil Ramachandran

Requirements, fault scenarios and advisory review.

AI and software
JJJeeth JosephJAJoji Alexander

Product, onboard AI, security and testing.

ETO and deployment
AJAshvin JosephRMRahul Madampillil

Data acquisition, interfaces and installation onboard.

FAQ

Questions superintendents ask first

Can MarineSense change anything on the ship?

No. It reads through a one-way gateway, and any write or control path is treated as a hard stop in testing. It advises; the Chief Engineer decides.

What happens when the satellite link is down?

Nothing changes for the crew. The model, the manual index and the vessel's history all run on the onboard server. The shore server only syncs and gives a second opinion when the link allows.

Do we need to replace our monitoring platform?

No. MarineSense reads from the systems you already have, whether that is the alarm and monitoring system directly or a platform such as SMARTShip or Vessel Insight.

Whose manuals does it use?

The vessel's own. Manuals stay in the ship's library and are indexed in place, with Chief Engineer approval. They are not copied to other vessels.

How do we know it works before it goes aboard?

We run it on ShipSim first. An instructor injects hidden faults, and your engineers can watch MarineSense find and explain them before you approve any installation.

Book a demo

Watch it find a fault on ShipSim

A 45-minute online session with our marine engineers.

  • 10 minYour fleet, makers and pain points
  • 25 minHidden faults injected live, explained by MarineSense
  • 10 minPilot terms and installation steps

This page is a preview. Requests are not sent yet.